Secraft smoke pump.mp4

Secraft smoke pump.mp4

Beschreibung zum Video:
New Secraft smoke pump, how to set up

Subscribe on Youtube: Martin Pickering, click here

Freitag – Newsletter, jetzt anmelden!

Vollständiger Text aus dem Video: Secraft smoke pump.mp4
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

okay let’s see how the new cigarette smoke pump works it has the advantage of being a brushless motor and the speed controller unlike most other smoke pumps is a normal brushless motor speed controller that we all know how it works and how to program so the program of it is very simple just like any other electric motor due to being for a smoke pump we don’t want it to simply come on and stay at a fixed rpm because that could cause a problem if throwing on too much smoke intro exhausts when we have our engine at low revs because it could feel the exhaust sub with smoke and make the engine down so what we’re going to do is make a mix with on the transmitter with the throttle so the fester we’re going more smoke whereas the new we are to idle the less smoke thus avoiding any possible problems okay let’s see how to do it for this example I have the channel one is our throttle and channel two is our smoke pump channel two is actually simply auxilary one which both example have renamed smoke so just a quick look on the server monitor we have channel one is twattle and channel two is smack now the first thing we have to do is dis activate anything that has any control over channel to the smoke so we simply go into function and on channel two this activate every control so no I mean another transmitters you can do the same thing simply by reducing the end point to zero all those sites now I simply case of making a simple mix which mixes the throttle to a channel to the smoke pump go into programmable mixes our mixed number one activate it and select a switch that we want to use to tend tunnel now I’m going to use s II and in its opposition as it is now now the master the one that’s going to control the smoke is this Hottel so the faster we go the more smoke the slave is going to be the smoke book obviously as it’s the wallet has to listen to the throttle to know how much smoke to use now we simply make the mix that goes from minus 100 to -100 again so we’ve got a nice long line which means when we move the throttle it goes with the line which means to get more smoke mol rpm on the electric motor more likely that’s basically it now because we’ve made channel to not have any control at all except for this mix when this mix is off transmitter is still going to be telling the smoke pump to be at zero so that’s not full that’s not take over it’s right in the middle right to avoid the smoke coming on we’re simply going to make the exact same mix again but rather than being linear is going to be offset to its off position so it activated again when we find the exact same street sitting slip to the floor with the indifference Bend at this time it would be in the previously off position which is the opposite so we should like that to be on master is still throttle slave is still going to be smoked and this time the offset is going to be label used where all Nuala mix we have the off position so that’s up here up to 100% so now no matter what the throttle does the smoke pump is going to be a hundred percent which is its off position that’s it so let’s see what that Ashley does when it’s off the smoke doesn’t actually move with the throttle however no term limits on is totally progressive let’s see what others with the answer will smoke from itself simply plug it in to the to sell or three cell line / I’ll be ready to go with the mixer on little stop that’s what no one has any control over it turns on again if any reason you want to reprogram the pump to read attack to the endpoints it’s just the same as any other electric motor because again it’s that nor brushless speed controller we simply put the throttle on full make the battery it leaves the letters notes in programming mode recognized full throttle now it needs to recognize the off position under ready to go now if I’ll fold that’s thrown too much smoke that’s very simple we simply change the end point of that mix as follows go back into that number one mix main one that makes the pump work and on the high rate simply reduce it so however is necessary look Noah or it’ll change that and friends will always follow what I lines dead and so if we put the outfit on the next pump steps simple
Für den Inhalt des Videos ist der VideoCreator: Martin Pickering verantwortlich.
#Secraft #smoke #pump.mp4
pickering, source