Descriptions:
AWESOME P-40 Warhawk 1100mm RC PLANE • ASSEMBLY • (English/Français 4K 60fps)
Beschreibung zum Video:
?? Hi folks ???
Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???
If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link
Thank you very much in advance my friends ???
?? Salut les copains ???
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???
Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal
Merci beaucoup beaucoup d’avance les amis ???
? Follow me on Instagram :
⏰ TikTok :
You can buy my things here ⬇️
✈️ P-40N Warhawk ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
???? P-40N Warhawk 1100mm PNP
Specifications :
Wingspan 1100mm, length 1000mm, weight without LiPo 1290gr with the bomb ?
⚖️ with CNHL 4S 2200 40C (256gr) : 1546g
-3536-750Kv brushless outrunner motor with ESC 45A, XT60 connector
-4S LiPo around 2200mAh
-Channels 6 (7 if using included bomb system)
❌ CG 55-65mm
? Rates (my low/ book’s low/ book’s high) :
– Aileron 10/12/20mm
– Elevator 7/10/20même
– Rudder 10/15/35mm
– Flaps 25/45mm with 2mm (15%) up elevator (à cabrer)
0:00 Presentation (NOT SPONSORED)
0:29 Foam hinges move
0:52 Control horn Ailerons, Flaps
4:13 Horizontal stab
7:49 Center elevator servo
9:07 Center rudder servo
9:30 Wing
11:00 Propeller
12:06 Balance the prop
14:47 Mount the prop
16:03 Glue antennas
17:30 Glue wing cowl
18:19 CG marks 65mm!!!
20:05 Bomb
20:19 Do the CG, LiPo placement
22:17 THANKS for SUBSCRIBING ??? (affiliate link)
23:23 Photos + LiPo placement CG 65mm
#p40 #assembly #rcplane #aerofoam #warbird #jeti #opale #radiocontrol #setup #modellbau #eflite #new #warbird #foam #rc #aviation #ww2
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!
Vollständiger Text aus dem Video: AWESOME P-40 Warhawk 1100mm RC PLANE • ASSEMBLY • (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!
[Music] foreign so guys today we will assemble together the P40 Warhawk 1.1 meter wingspan from aerofoam available at turbine rc.com so first they said to move the you see the the foam inches so I’ve already done that five to six times almost after that so we will assemble the the horns and the lean cage so on my bags they switched the the labels on bags you can see that the shorter linkage are for the irons of course like that and the longest will be for the flaps don’t go away um [Music] with my Servo tester I just put the the servos at neutral position all right it’s 1.5 millimeters Allen driver it’s in clearlands and as you can see on a very uh very little plane like this one to have buildings everywhere is very very nice foreign great so folks um to set the the neutral flaps so the the close flaps position you will need to to put your Servo at a neutral position 90 degrees angle so I will have to unscrew I don’t have the same deflection so I need to unscrew I need to unscrew a bit more the left side foreign so that’s good for that um we’ll do the the horizontal into the carbon Spar you know there’s one carbon this one is very little screw will go right there over there is we will have to glue this uh these parts on the uh on the elevator the longest it’s for the the front and the shortest is farther back as long as if you wanna classic not too much I think it’s enough are we oh my god let’s see all right it’s tacking yeah that’s good foreign foreign [Music] so now let’s screw this that’s good I will try to the center of the cell rope would perform there so this is the center position and the center of the elevator is like that yeah so it’s almost perfect crew yeah you feel what’s up great foreign [Music] we will Center the rudder little so we will attach the wing I’ll try to pull the wires all right so they are longer screws too long and too shorter so the shorter will go to the back of the wing and clip I said obviously foreign [Applause] push each of the propeller blades into slot note that the numbered side of the blade face outwards okay you can see the numbers and it should be up to you face to you sorry secured blade to the hmm so you used it through the three screws you already have to push blades into their slats for MRP for Opera that looks good I will use some tape to add some weight on the lightest blade ah that looks better yeah now they the heavier is this one and try to remove some that was this one let’s check yeah still this one so maybe I can remove this this part maybe I can add on the other one ah now that’s good you can see that it it doesn’t spin anymore like crazy that’s good perfect so I have a lot of amount of tape on this one but well it’s like that okay good oh whatever foreign is balanced and the screws are in no no Slide the assemble back plate and Blades sir you have to remove the bolt and the washer so you can see some wrong square shape so you have to put that inside that yeah perfect fit never over tight Bim now the nose cone with the long screw but now I might look underneath I’ll exit garages cool using a small amount of glue now we will glue the a longer yellow into the slot behind the canopy the short Ariel into the battery and the beater tube all right so let’s glue this foreign perfect goes like this so yeah I can glue this but it means that I won’t remove the wing easily but yeah I will do that all right huh everyone else again it’s very uh very easy for a plane like that no big deal and I will check the CG also the CG is between 55 and 65 millimeters from the linkage I always start with the more fcg so this is 65 millimeters and if the CG is a bit further back it will be harder for the plane to nose over also so that’s that’s better I assume that one CG can um it’s right there then right here so we’ll make a mark that’s a big mark but that’s okay well I can fit it [Music] but well we will start with the book as we don’t know anything about this little uh little plane we won’t go we won’t go too crazy for once and uh yeah all right all right I can’t see the whole yeah it’s on the good way you can see so cool currency let’s see the CG without my receiver just to to check this out so you see the Lipo placement like that well it’s still a bit nosy but that’s better but yeah I can I can put it back just a bit like that I will have to carve the foam to secure the Lipo let’s check it out yeah that’s it that’s that’s good that’s good all right all right so yeah this is the Lipo placement for a lipo of 256 grams so that’s it folks that’s it so uh I hope you you enjoyed it and uh I hope it uh it helped you and um if you liked it as usual folks don’t forget to put a thumbs up and to subscribe to the channel to to support my channel as you know guys it’s very important for me and for the future and if you want to see more planes either with good and detailed reviews like I always do and uh yeah so here you go The Beautiful Beast is superb [Music] superb Superman is see you very soon guys bye [Applause] [Music] [Music] foreign
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#AWESOME #P40 #Warhawk #1100mm #PLANE #ASSEMBLY #EnglishFrançais #60fps
arthur rc, source
