DETAILED ASSEMBLY • AVIOS (PNF) US Coast Guard PBY Catalina EPO 1900mm Seaplane •

DETAILED ASSEMBLY • AVIOS (PNF) US Coast Guard PBY Catalina EPO 1900mm Seaplane •

Beschreibung zum Video:
Buy yours here :

You can buy my things here ⬇️

✈️ HOBBYKING ➡️
✈️ FMS planes ➡️
🎮 Jeti Rx and DS16 ➡️ @OpaleParamodels
🔋CNHL LiPo ➡️
✈️ Jets and more ➡️

Quick set up guide

Assembly Manual

Supplied:
1 x Avios PBY Catalina airframe in US Coast Guard color scheme
2 x Aerostar 3748-820kv brushless outrunner motors
2 x Aerostar 40A RVS G2 ESC w/BEC & instant reverse
1 x 10×6 3-blade CW propeller
1 x 10×6 3-blade CCW propeller
1 x Pair of electronic retractable wing-tip floats
5 x 9g servos
1 x Water rudder assembly
1 x Quick Set Up Guide

Required:
1 x 5ch or more Transmitter & receiver
1 x 4S 3200~4500mAh 30~60C LiPo w/XT60 connector
1 x 9g servo if using the optional water rudder
1 x 9g servo if making the nose gun turret operational (left & right)

❌ Book CG 75-80mm from wing root : maiden at 80mm with Turnigy 4S 4000 30C (400g) placed???

📏 Triple Rates in millimeters (my own low / book’s low rates / book’s high ) :
Ailerons : 10/14/20
Elevator : 10/15/22
Rudder : 15/22/38

⏱️ Flights & remaining voltages :
-Maiden filmed (Turnigy 4S 4000 30C (400g)) :

Subscribe on Youtube: Arthur RC, click here

Freitag – Newsletter, jetzt anmelden!

Vollständiger Text aus dem Video: DETAILED ASSEMBLY • AVIOS (PNF) US Coast Guard PBY Catalina EPO 1900mm Seaplane •
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] hi folks Hobby King uh so first uh today uh guys we will assemble the the new Catalina from Hobby King aios this is a 1.9 m C plane so first uh it says that if you want to um to opt uh for the the optional water rudder you have to done that first [Music] so I won’t do the the water rudder so first I will uh I will assemble the the horizontal stabilizer so we will need four uh four little screws with the the spar so this side this way you can see the hole right there so of course don’t forget to plug the sero wires you can see it’s secured with a a little pin so that’s really really nice you can feed can feed the wire inside the screw bag so that’s the water rudder we got the nose cone and the screws so um slide on to secure using the four 3×16 hex head selftapping screws to each side this assembly can be glued as well you will need a two 2 mm key screwdriver driver never overtight that’s enough like that yeah perfect up yellow to yellow well yellow to white on up yes extra extra extra i love when uh the assembly is simple when everything fits perfectly that’s super cool so next position the wing center okay all righty yeah perfect don’t need to glue this i think this is Yeah it moves just a little bit but I think that’s okay all right so position the wing center section on the fuse please make sure you feed the cables from the wing into the fuse secure the wing with a two okay it is in 2.5 mm for the wing panel yeah that’s it let’s do this okay okay so we have the XT60 for the two uh two engines we got the throttle i think this one is for the reverse this little pin reverse throttle too if you want to do a differential thrust you can do this because you got two throttle wires but I will use the Y wire get don’t 40 guys up that’s the LED and the aons arons and the gear of course right there so first you you can do the the first uh first try without the wing like that you you know how to to screw it and then you can assemble the wing yes and then it goes perfect be sure there is no cables stuck when it’s becoming tight just stop it yes perfect nice we’ll attach the wing struts the wind the slightly longest ones go at the front foreign and the slightly shortest one to the rear start with the left hand side retain the left hand stretch using the four no right all right okay take No is thick don’t full screw it first we will screw the bottom screw so that’s something you won’t remove for a transport because that that can be a bit long at the field so the central panel wing will be always on okay i always say tech yeah it’s on that way you see like that now do the other side all right so that’s done for the struts now we will have to glue the tail yellow to yellow that’s so easy assembly guys yeah well glue like that the two parts and then how can I put that on the nose hello there i will do some scar on the foam it’s super let’s glue this you pour and you push contact [Music] i use the big big foam foam piece like that i won’t damage the nose of the plane and yeah that’s that’s that’s good i will let it uh dry like that against against the wall and we will continue the assembly after I will let it dry like that and I will catch you later so now it’s almost dry yeah it’s pretty dry um we will uh keep on with the we have to cover uh the joint with uh with the stickers you see right here but I’m afraid we will mask will hide the coast guard so maybe I will cut it yep ugly very ugly that’s better the next step is to fit the props and the spinners so this rotate towards the fuse all right so this one is the right one and this one is the left one i’m going to You take looking from the front the left hand prop rotates counterclockwise yeah that’s it and the right hand prop rotates clockwise note the prop leading edge in the above picture okay secure the prop using the spinners nuts provided is recommended that the fitting of the props is held off until you have set up your radio and the control froze yes I don’t care not overtight as usual and I think that’s something you will have to check after and before each flight that’s a suggestion my friends the last step in the basic assembly the fitting of the two wing tips using the supply spars This slides into the center section ensure the connectors line up correctly and the tips click firmly into place we have found that in some instance the clips may need a slight trim with a sharp modeling knife once the tips are fully located if you wish to remove them just press the release click clip and they slide off all right don’t All right put them down whatever don’t see Superb wow that’s [Music] cool cladio i will do now the throws and this is the installation for the the operated nose gun turret if you want to and yeah that’s it here are the throws for Thank you folks for watching as usual don’t forget to thumb up and subscribe to the channel guys that’s very important for us thank you so much in advance and take care and see you soon in a new video bye-bye [Music] ow oow [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#DETAILED #ASSEMBLY #AVIOS #PNF #Coast #Guard #PBY #Catalina #EPO #1900mm #Seaplane
arthur rc, source