*NEW RELEASE* L-20 Trainer 1.3m Sky Flight Hobby | ASSEMBLY, RADIO SETUP | (English/Français) 4K

*NEW RELEASE* L-20 Trainer 1.3m Sky Flight Hobby | ASSEMBLY, RADIO SETUP | (English/Français) 4K

Beschreibung zum Video:
Hi folks ???

If you want to see my hangar growing even more, I accept Paypal donation if you want to help me to buy new planes that you want me to review ? thanks guys ??

Thanks a lot for watching and feel free to subscribe to support the channel and never miss a new video ???
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer ???

? Follow me on Instagram :
⏰ TikTok :

You can buy my things here ⬇️

? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️

0:00 Intro Presentation
0:44 Landing GEAR (screws discussion)
3:03 Horizontal STAB’ (@PetrincicBrosRC callouts ?)
4:41 Glue the SHROUD (haubans)
7:03 Rx installation (@OpaleParamodels Jeti Receiver)
10:20 Jeti Radio settings (servos check)
11:08 Jeti Gyro settings
12:05 WING installation
12:45 Reverse the ailerons servos
13:23 Flight modes modification
13:45 Back to GYRO settings
15:29 ELEVATOR linkage
17:30 Dual RATES settings
18:38 SHROUD clips (Hauban)
20:22 PROPELLER installation
21:46 It’s finished !
22:16 CG settings (75mm)
23:42 THANKS ???
25:38 Photos (LiPo Placement)

?? Sky Flight Hobby (Lanxiang) L-20 Trainer

-Specifications:
-Wingspan:1280mm, Length:1000mm
-Weight : 970gr without LiPo, with HRB 3S2200 (170gr) 1140gr
-CG 7.5mm from leading edge wing (finger tip in the ailerons wires channel under wing)
-Motor 3136-1120KV with ESC 30A
-LiPo battery : 3S 2200mAh 25C
-Servos : 9g*4pcs Digital metal gear
-Flying time : About 15min

Design Features:
-EPO foam material.
-Main wing, Horizontal tail, easily
detachable and assembled in minutes.
-Stable Flight Performance.
-Can do aerobatics.
-Big EVA wheels, Suitable for most runways.
-Beginner level, easy to control.

My Rates (low/mid/high)
-ailerons : 15/20/25mm (50/80/100%)
-elevator : 10/20/30mm (35/60/100%)
-rudder : 20/30/40mm (50/80/100%)

#trainer #rcplane #lanxiang #skyflighthobby #jeti #opale #radiocontrol #setup #modellbau #l20 #eflite #new #beginner #assembly #build #foam
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: *NEW RELEASE* L-20 Trainer 1.3m Sky Flight Hobby | ASSEMBLY, RADIO SETUP | (English/Français) 4K
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

foreign [Music] [Applause] the trainer from Langston Sky flight Hobby so I don’t have any uh manual book yet so I will try to to do it by myself but I think it will be a it will be easy so first I will screw the the gear um we’ve got this three screws for the gear these two little are for the the horizontal stabilizer and accessible perform there is so these two uh two screws are for this this part to screw under the wing you see these clips will be on this hole and that’s it that’s for the wing to fix the wing and we will have to glue this on the side of the plane you see right there we’ll have to glue it uh right here with the the flat spot corner towards the front of the plane it will stay in the plane and you will you will remove this part with the clips to remove a metal eclipse voila Vada so the screws for the gear Phillips Phillips driver you see there is one way to put that that gear because of that part is we will do the the horizontal so there is a small Wings bar in Cleveland in the hole easy nice and the other side Robert petronics Brothers we love you all been perfect fit I will have to to glue the the rudder inch some shipping damage all right that’s cool so the two uh the two little screws foreign it’s so simple that you don’t even need to to look at the instructions all right so that’s done uh we will uh we will glue this uh this uh these parts so this one on this side I will do some some little marks right right there and I think it will be enough right so you you remove it just a bit to let the air get in foreign and then you you push it back and it will be perfect we’ll do the same on the other side so the flats put the flat spot the flat corner front Ward perfect okay good so yeah the receiver I will put it right there I’m trying to catch xt60 okay for the Lipo and I will put my receiver so I know it’s a big receiver this is a 10 channels but I’ve just I just have this one right now at home so I will change I will change the receiver later there are only a four channels air runs elevator Rudder and throttle I succeed on your camera yes I don’t want foreign ER and that’s all this is an assist an assist receiver so there is a gyro gyro inside France so I will pretty try there perfect nice nice nice this is my uh Telemetry voltage sensor okay the antennas we don’t care I put that just behind with JT we don’t really care about the the antenna placement it’s so powerful no problem so we will uh we will plug it the reverse Rudder is reversed Salvo for the elevator it’s on the right way good configuration community so that’s good for this position of a receiver server digital we will calibrate our category is their own always check the polarity all right so it’s alive we will put the screen the wing right there foreign that’s done really nice so I don’t need the the stand oh yes it’s yeah to do the the things so the aerons are reversed so English we will change the other ones good nice I’m just changing the tempo between my three raids foreign awesome thank you elevator full up and full down good rather let’s see the difference I’ll never this is very good this is very good foreign foreign so we’ll go to the the outer hole as well foreign I have to screw it to be perfectly flush I’m good on the outside outer hole all right so that’s my low rate I think it’s a lot yeah it’s really huge I will put that down so I will keep the 50 rounds but they’re the the elevator I will go to uh 35 for the low 60 for the mid and higher will keep 100 always I had some trim for the flight modes because it was a receiver for a glider before but now it’s removed all right they trim the festival um so now we’ll put these things foreign that so I will screw it and then you will have to secure that thing with a clip boom like that perfect you know Western Shop is switch thoughtful cut so we will remove the nose cone behind there is that thing the spinner I will remove it just put the you see on this way this this side with the these holes against the the plane ready the washer attack and then you just have to screw the the nose cone and it’s done yeah that’s done [Music] nice nice power and that’s done guys you don’t know please foreign great so now it’s totally uh assembled we will check the the CG the CG that uh 70 uh 75 millimeters from the Leaning Edge and it’s just on the wiring channel right there this is the the first third of the wing uh of the Ring root foreign right there and this is my lipo placement so this is a 3s 2200 50c from hrb and the weight is 170 grams and it’s placed like that but you can see if you move it further back we will see that it’s it’s going tail heavy boom yeah it’s falling it’s falling to the tail foreign I would say just right there at the right here you see the front of the Lipo at the the limit between the plastic and the foam you see so that’s the the good lipo placement for a lipo of a 100 and 70 grams so this is it guys here you have your uh little Ella l20 very nice little bird one 1.3 meters wingspan it’s so that’s pretty cool very nice can’t wait to to fly this one so as usual guys thank you so much for watching don’t hesitate to put a thumbs up if you if you liked it and uh I see you very very soon for the maiden flight of this bird and then the t-45 turbine so yeah don’t hesitate to uh to subscribe to the channel it’s free and it will help me a lot for the future so thank you thank you so much for that guys foreign have a good summer early days guys and a good summer for those who who won’t be on holiday and see you very soon bye bye guys [Music] [Music] thank you [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#RELEASE #L20 #Trainer #1.3m #Sky #Flight #Hobby #ASSEMBLY #RADIO #SETUP #EnglishFrançais
arthur rc, source