ASSEMBLY & RADIO SETTING • NEW Freewing Eurofighter Typhoon 90mm RC PLANE • (English/Français 4K)

ASSEMBLY & RADIO SETTING • NEW Freewing Eurofighter Typhoon 90mm RC PLANE • (English/Français 4K)

Beschreibung zum Video:
? Buy your CNHL LiPo ➡️
? Buy your Universal Afterburner KM RC Model ➡️
❌ Buy your Planes Stands here ➡️

Get yours at

?? Hi folks ???

Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???

If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link

Thank you very much in advance my friends ???

?? Salut les copains ???

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???

Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal

Merci beaucoup beaucoup d’avance les amis ???

? Follow me on Instagram :
⏰ TikTok :

You can buy my things here ⬇️
✈️ FMS planes & cars ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️

???️ Freewing Eurofighter Typhoon 90mm EDF Jet PNP

1/11 scale
Wingspan : 1030mm (40.5in)
Length : 1450mm (57in)
Empty weight : 3124g
Weight of KM RC Model Afterburner : 22g
Weight of 2 tanks, 4 METEOR, 2 ASRAAM, 2 GBU : 177g
Flying weight : with full missiles, tanks + afterburner KM RC Model (22g) + CNHL 6S 4000mah 70C (691g) : 3887g
Wingload : 125.38 g/dm2
Wing area : 31 dm2
Power : 3668-1960kv Brushless inrunner motor
ESC Hobbywing 120A with 8A BEC
12 blades EDF
9g hybrid digital servos x4
9g metal gear digital servos x2
17gr MG digital servos x3 (elevons and rudder)
LiPo 6S 5000-6000mAh (depends on their weight)
Rx 7 channels minimum (throttle, elevons x2, rudder (mix with nose steering wheel), gear, airbrake, reverse
Nylon hinges
EPO foam

❌ Book CG (gear up) : 215mm from wing root Leading edge but MAIDEN 235mm ! CNHL 6S 4000 70C (690g) all the way back and 20gr counterweight they give you in the rudder (hole where rudder servo comes from)

? Triple Rates (my low / book’s low / book’s high) after maiden :
Wing Ailerons : 16/16/24mm
Wing Elevator : 14/35/43mm
Canard aileron (not scale…) : 10/10/15mm measured leading edge
Canard elevator : 8/20/26mm measured leading edge
Rudder : 20/27/32mm

⏰ Flights with timers and voltage (checked few minutes after landing):
-1st filmed, crosswind : CNHL 4000 70C CG235mm : 4m50 flight (4m18 motor) 3.74v
-2nd windy and fast : CNHL 4000 70C CG235mm : 3m14 flight (2m30 motor) 3.81v
3rd filmed : CNHL 4000 70C CG235mm : 2m38 flight (2m13 motor) 3.83v

0:00 Intro
0:18 Tail foam part gluing
1:41 Nozzles gluing
4:38 Canards
6:50 Wingtip cowlings
9:57 Wings
12:28 Rudder
15:05 Nose cone
15:20 Missiles METEOR
16:03 GBU & ASRAAM
17:17 Tanks
19:16 Landing hook
19:40 Antenna & Pitots
20:20 Landing gears close up
20:51 CG 235mm (20mm behind book) and still nose heavy !
21:05 Counterweight 20gr
21:34 CNHL 6S 4000 mah 70C (691g) all the way back
21:48 Landing gear sequence
22:14 Wiring & Jeti Radio
24:34 Cablage & affectations Jeti DS16
26:05 Reverse SETTING
27:12 Mixing canards
28:16 Canards inversion tuto
30:36 Check Reverse
31:16 ESC Calibration
32:14 Neutral canards
34:45 Check the manual & rates
37:01 Check the weight : 3845g
38:00 Thanks for watching ?? please SUBSCRIBE ?
38:51 Details photos

#typhoon #freewing #rcplane #eurofighter #eurofightertyphoon #jeti #opale #radiocontrol #spanish #modellbau #new #foam #rc #aviation #release #unboxing
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: ASSEMBLY & RADIO SETTING • NEW Freewing Eurofighter Typhoon 90mm RC PLANE • (English/Français 4K)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] foreign from free wing so first we have to glue this uh this part tail foam part so I’ve already do some some marks you see right there on the on the piece of foam too this is a um apply the two two pieces see that I’m using the four model stand which are very very nice very small and very easy to use so you you put that the first time like that and then you can pull off and let the air get in a um [Music] foreign so we will glue the nozzles you don’t need to put too much internal so you do the same push at the right place you can go back and forth back and forth is a um becoming very techy so we will let it dry we will do the same for this piece no coffee I should have glued the nozzles before because it’s not easy to go there that’s why it’s interesting for you to watch some videos before doing yours like that you don’t have to do my mistakes yeah I tried you clearly the the matlabs are here comes a lot of um put it like that and maybe turn around and that you will have some glue everywhere so I push slightly now it’s becoming very techy unless it come on then we will crew and the canards turn over the fuselage turn it over put the screws like that with your your hand one finger you can push the the rod outside this is these two uh two little screws so you find the whole City you take your two millimeters uh Allen key thank you maybe I will put a bit of a a bit of Thumbtack glue on my screw just to secure it should just securely the curl just a bit of glue I’m gonna do the same for the other side put your fingers inside the canopy the cockpit like that you can put it like that and here we go I don’t know it’s good girl foreign okay install the main Wing as a photo show connect the LED plug of the wing tip on the LED light plug of the main Wing note that there are positive and negative of course install the left and right wing calling on the main wing and fix it by screw so we’ll need four screws this is 10 millimeter screws so it’s this one you see yeah it’s two millimeters you take that off and so you see there is a there is a way with an arrow so you can’t put it like that foreign so it’s this way you see you see the arrow and it’s on this way because zro is uh going forward so right to Red with the painting it’s not easy though the black is on top I know I don’t all right feed the plug inside and boom the two millimeter right now the other one so the first one is done now we’ll do the same for the other one take let me set a dump it’s a bit hard but yeah good done before these shoes comes up all right that’s done and now we can we can put the wing together on the fuselage with the big wings bar you can just lift that slowly just a bit very slowly all right so open the rear cabin and set the ribbon cables of course the cables cables are right there see them here just have to take that off and you plug it fine fine fine and boom that’s it now we are here we will do Limitless three millimeters and these screws will stay in the wing that’s a very very nice Improvement it’s like on the Mig it’s very very cool to have that feature on three wing planes and as you can see this is a perfect fit perfect nothing is a nothing is forced everything is easy to assemble and aligned that’s really important and that’s done now we’ll do the same for the other wing that’s it okay it will be easier with a with pliers that’s in it was not that easy and that’s it for the wings so everything is good connect the red ass have extension cable Infuse the light extension and install the vertical stabilizer for pieces 10 millimeters we’ve got the four pieces right there and you see that in the decals you’ve got some uh formation light and the same as this one you see so if you don’t put the well yeah you have to put this uh this big one on the on the rudder so I will I will apply that before installing the rudder don’t question foreign [Music] we have to put a big one on this uh on this rudder incredible um maybe something anymore now that’s good we’ll plug that full polarity as usual um in order to have the CG 20 millimeters behind the book I put the counterweight that they give you in the kit this is 20 grams of lid I put in the the hole where the wire rather Servo come from once again that’s a perfect fit as you can tell let’s screw the rudder the vertical only I’ve put the plane on its Wheels all right then you could add a magnetic nose cone so you can see there is a strange shape that will fit only one way foreign are for the left side you see you can see right here okay foreign then you have to put the missiles and the GPU no Capcom is you can see the difference of the pylons guys so the GPU are inside the inner so it’s right there yeah it’s one you’ve got one missile uh of course the the letters should be a faced outside like that is good Perfect all right then we have to glue we have to glue you see the the pi alone of the drop tank so we will glue that you can see that there is a a plywood part which will go in this uh in this rail so it will go this way um [Music] foreign the air get in between the two pieces so there aren’t any uh any differences between the two tanks put that this is magnetic soy multi now we will glue The Landing hook all that coordinated to your tier crochet Lacoste okay very symmetries just like that and then we have one antenna and the pizza tubes I’m recording PD they get pretty soon so now we can check the the landing gear you can see the the beauty of that thing that’s pretty scale and finally white painted very beautiful [Music] [Music] very hard very hard wheels foreign you have one spring and a counterweight so that’s counterweight of a 20 grams that I put in the in the rudder in the the hole where comes from the server wire this is I’ve got my cnhl 4070c the weight is 690 grams all the way back you can see the lights [Music] foreign for the wiring so I have eight channels um eight channels because I’ve got so the the throttle in first and first you have to set your planes like a normal plane not a delta wing on your radio just set it as a normal pane like like a trainer or normal normal wing so I’ve got the other one in two I’ve got the elevator everything is leveled in the jet the four it’s the rudder only the rudder because I I switched off I um I plugged I unplugged the the cable from the the control box right here you will see there is a two plugs for the rudder so I unplug one and I put directly into the receiver either as a rudder the five is the outbreak [Music] so it’s on off [Music] so that’s good for the outbreak the six is the landing gear the seven is a reverse the reverse is in the seven and it’s a very simple cable with only the signal wire only one wire this is a yellow wire and so I’ve put that in the in the seventh Channel and the eight is a no steering wheel so um I unplug the nose steering wheel from this board and the rudder is still in the board so the radar is in the board and I unplug the nose steering wheel that I put in my eight channel and that’s all you just need a eight uh eight channels no conference is foreign foreign [Music] proportional receptor [Music] Outlet effectively is A2 so um and that’s done and just a little thing about the reverse you will have to set so you will have to set the reverse so you go in your in your servos and the reverse has to be between the range of the servo has to be between 0 and 50 percent and just that minus the minimum is zero and the highest is a 50 percent you will see the the way if it’s negative or positive 50 but it should be like that because it won’t work on foreign foreign [Music] so it’s a it’s stuck there is a mixing for the canards with the roll I know it’s not scale the Euro Fighter hasn’t got any role on the canards but I don’t want to to unplug everything and to set everything uh on my radio so it will be like that it’s easier and I will keep it like that we don’t really care we are not here to make a world championship of scale a jet so yeah it will be uh it will be like that so we will check the the ways you see that I climb when I climb it’s it’s on the good way for the elevens but not for the canards the canards are not on the right way when I when I pull up from there is um foreign to switch the way of the of the canards you just have to unplug these two uh these two plugs Canard you can see right there and you just have to unplug this and switch them you just have to switch the the wires so I will do that right now it should be good so let’s check if I climb yes that’s good now I pull up I put up and that’s on the right way perfect up and down that’s cool and so for the other ones that’s on the right way too I’m I go on the left left around so the left elvond is Lifting Up and the canards is lifting up also so yeah that’s good because it means that um it will pull it will push under and so it will go to the left if we push under it will go to the left so that’s on the right way foreign all right so that’s good we will check the reverse so I put my throttle cut off which made a gas [Music] hey I could so it works it works pretty good yeah good so the reverse is working I will now uh calibrate my throttle is you let’s your controller your radio on you um the throttle is on also and you put full stick up and then you plug your plane you will hear [Music] and now you get down [Music] and that’s good it’s calibrate and go up I need to go back perfect perfect so that’s done we have to deal with what with the neutral canards we will check on the book yeah installation of the Canon is shown in the below there is a scale on the fuselage you can use the Leading Edge of the Canon to align with the skyline the black line in the figure below okay so you can see that there is a line you will have to to put your canards along that line is [Music] foreign yeah so I will have to screw I will have to screw this uh this this Clevis good so this one and it’s too much maybe just a half a half turn will be good now we are good on this side try to do the same on the other so we said you get to screw under if you see under me too I have to screw have maybe more on this one maybe one yeah yeah now that’s good perfect that’s perfect that’s cool the irons are perfectly flush and that is [Music] so that’s the flight precaution with ESC calibrate and as I said the channel travel for the reverse should be 0 to 50. and then we we will do the the raids but I will need my iPhone to to do my own rights because I will I will apply my own low rates as usual you know me guys I ate big big rates the thrust is 4.3 kilograms with this new uh in runner motor um foreign sasiva you will have to measure the Leaning Edge of the canary all right all right folks so this is it I think I uh I said everything so now it’s almost ready to fly we will have to wait for the weather once again but before uh leaving you I will I will put the the plane on a on a scale see the weight so the weight is three point eight 46 grams if ah [Music] donkey pairs so the way it is three thousand 845 grams so that’s pretty cool not that heavy yeah that’s it yeah okay boys [Music] all right folks thanks for watching guys thanks for watching I hope it will be helpful for you and I’ll see you very soon for a new video as usual don’t forget to put some thumbs up and to subscribe to the channel if you are not have a good one stay safe and see you very soon or future videos take care see you soon bye-bye foreign [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#ASSEMBLY #RADIO #SETTING #Freewing #Eurofighter #Typhoon #90mm #PLANE #EnglishFrançais
arthur rc, source