Cyclone Power CENTERBURNER Lighting System V3 – ASSEMBLY in my XFly Sirius 80mm (ENG/FRA) UHD 4K

Cyclone Power CENTERBURNER Lighting System V3 – ASSEMBLY in my XFly Sirius 80mm (ENG/FRA) UHD 4K

Beschreibung zum Video:
Hi folks!
Here is a really nice goodie from RC-CASTLE.COM
A big thanks to them ?

The Cyclone Power CenterBurner V3 Lighting System With Single Light Bar for 80mm EDF:

Easy to Install & Set Up.
– Suitable For FMS, E-flite, Freewing and XFly 80mm EDF With Inrunner Motor .
– Suitable For Other 80mm EDF with 32mm Diameter Inrunner Motor.
– With Super Bright 21W LED CenterBurner Light Bar
– With Y Cable , 4s & 6s Battery Balance Plug to JST Plug Include.

Specifications :
– Input Voltage: 12v – 25v ( 3s – 6s )
– Output Power: 12v / 4.5 A
– Controller Size: 23mm x 69mm x 10mm
– Controller Weight: 20g
– CenterBurner Light : 3014 LED Light x 144
– CenterBurner Light Input Voltage : 12v
– CenterBurner Light Power: Around 21 W
– CenterBurner Light Rating Current: Around 1.7A ( At 12v )
– CenterBurner Light Mount Diameter: 36mm
– CenterBurner Light Lead Wire Length: 900mm
– CenterBurner Light Weight: 40g (With Lead Wire & Plug)

Don’t Forget to subscribe ??? see you soon guys!

Subscribe on Youtube: Arthur RC, click here

Freitag – Newsletter, jetzt anmelden!

Vollständiger Text aus dem Video: Cyclone Power CENTERBURNER Lighting System V3 – ASSEMBLY in my XFly Sirius 80mm (ENG/FRA) UHD 4K
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] [Music] so guys today we will talk about the center burner from cyclone power and then big thanks to uh rc castle.com for this uh this lightning lightning system and as you can see there is um the light system the the afterburner you can you will plug the the controller here we plug the controller and then you have this wire uh which we go into your your balance plug from your lipo 6s and then you have a y wire so you put the controller inside and this one is for the throttle wire the controller it’s really well done with all the information you you need with a little uh a little how to this is uh some instructions we will check that in a few moments put that center burner in the uh series from x fly model the pc donation so let’s unscrew these two screws easy i think it’s two millimeters yes two millimeters once again always be careful with that that’s beautiful all right it should be okay like that yes but when it fits inside yes that’s perfect i will screw and screw that in yeah perfect that’s nice all right so so now i have my my tool my go through wire go through tool don’t know how to to call that do it like that all right good that’s it let’s put that in so i will have to remake my cg because the center burner you need weights 40 grams gum again all right now that’s good all right so that’s done now let’s plug everything number two so let’s plug the controller so that’s uh this is for the this is a lead this is a led center burner and so we will plug this into the controller black to black the pc controller and then we will have just one one wire left so this is a throttle but first we will listen to the instructions switch on the transmitter move all right move for a little stick to the top position connect controller and esc together connected and then we will plug this y wire into the throttle channel that’s it all right myself extension for a run power the receiver but if i power my receiver well now i get my throttle cut on connect battery with controller battery with controller so this is a controller and my battery my ipo is there all right so the controller everything is plugged yes so the controller blue indicator refresh three times but no because i have my throttle cut i’m sure it’s because of that because of that oh it works it works without doing anything i just plug it and it works that’s good pretty nice you can see the blue blue led perfect so that’s good so now i will have to to redo my cg and [Music] and make a bit of a of sort and i will tiny my my jet lag gravity it’s good like that and then we can plug this wire all right it’s pretty uh pretty bright you see see [Music] the ignition is really really well done it twinkles very uh very beautiful so this is it for uh for this uh this review about the the cyclone power center burner lightning system v3 so uh thanks again uh rccastall.com for uh for that nice nice little tool nice little uh accessory i would say so we will try this in flight during uh during my next my next flight with the cyrus from x fly so guys as usual don’t forget to like if you like dislike if you don’t like and don’t forget to subscribe not to to miss any any new videos just like see you see you soon guys thanks again and have a good day bye [Music] you
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#Cyclone #Power #CENTERBURNER #Lighting #System #ASSEMBLY #XFly #Sirius #80mm #ENGFRA #UHD
arthur rc, source