Descriptions:
E-flite Air Tractor 1.5m PNP – DRILLED WHEELS & Touch’n’go (4K)
Beschreibung zum Video:
Hi guys and thank you for watching ?? feel free to subscribe and click on the ?
This is my 5th flight of the awesome Air Tractor 1.5m from E-flite.
? long 98cm, weight 1.72 kg empty
With Admiral 4S 3000 (10min30 3.83v)
Book CG 60-70mm (mine 70mm)
Rx7 Jeti Assist
Motor 800Kv BL10, ESC 50A
Tripale 11×7.5
Flaps: 10/20mm (5% up elevator)
Low: ail 10mm, ele (measured end of trim elevator) 9mm, rud 14mm
Mid: ail 14mm, ele 9mm, rud 22mm
High: ail 20mm, ele 13mm, rud 32mm
Freitag – Newsletter, jetzt anmelden!
Vollständiger Text aus dem Video: E-flite Air Tractor 1.5m PNP – DRILLED WHEELS & Touch’n’go (4K)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!
hi guys so this is the fifth flight of the air tractor from e flight and i drilled five millimeters holes in the wheels because they are really really stiff and now it’s a it’s a bit better but it’s it’s still hard so we will see on uh on the most runway [Music] let’s go for the fifth flight one notch of flap with my with the low low rates of the book nothing to do that’s a crop duster so i have to to fly it low here we stand without flaps i will try to to land with the holes in the wheels ah that’s better that’s way better it’s less bouncy so cool really easy to fly we’ll try again with a bit of a more power three point landing that’s fine but i think that i don’t have enough rates on the elevator so i will set 50 percent let’s go again there is a admiral 4s 3000 inside and you see that she climbs unlimited nice whistle sound really beautiful little plane and it’s really scale this is the like the real one full flaps foreign pretty cool that’s nice and you see i’m at three minutes of flight and still uh 4.02 volts in the lowest tail yeah that’s good you
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#Eflite #Air #Tractor #1.5m #PNP #DRILLED #WHEELS #Touchngo
arthur rc, source
Tags
4 Comments
Comments are closed.
Great flight Arthur! I use Dave Brown wheels on all of my planes(they are really soft). You could find them from Motion RC.
If you can't find the exact sizes for your application. Just go one size larger, put it on a drill bit, then sand it down to the size you need.
Yes it works! No bounce at all, I'm wondering about a larger tail wheel, the stock is very small
Tu es l'un des trop rare francophone, only French please ???
Great idea Arthur, did you drill all the way through? Was indeed a great flight. ??