FlyFans Saab JAS-39 Gripen 70mm EDF JET PNP | ASSEMBLY / BUILD | (English/Français) 4K

FlyFans Saab JAS-39 Gripen 70mm EDF JET PNP | ASSEMBLY / BUILD | (English/Français) 4K

Beschreibung zum Video:
Hi folks ???

***Sorry for my bad tired voice, I have that f*%king Covid from 5 days…***

⚠️ The Waterdecals are folded and unstuck because of too wet and cold weather conditions in China factory, but it’s only on mine ⚠️

A huge thanks to you my friends for being subscribed ??♥️ you’re now more than 1000 that means a lot to me and I will do a giveaway in a future video (I’m waiting for a new plane ? surprise…) / Salut les gars ??? un énorme merci à vous mes amis de vous être abonné ??♥️ vous êtes maintenant plus de 1000 ça me touche beaucoup et je ferai un cadeau tirage au sort dans une future vidéo (j’attends un nouvel avion ?surprise…)

Thanks a lot for watching this video, please subscribe to support the channel and never miss a new video ??? / Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer ???

Follow me on Instagram :

– ☄️?? FlyFans Saab JAS-39 Gripen 70mm EDF JET PNP ➡️
– ? Instruction Manual ➡️

!!!! There are many different schemes of that beautiful FlyFans Gripen 70mm EDF, just be curious and check it on Turbines-RC !!!!

0:00 Intro
0:14 Presentation
1:00 Servos labels
1:48 Unscrew plywood
2:09 CH5 Landing gear (useless lol), nose wheel check!
4:02 CH6 Canard check (Y wire)!
5:50 Assemble the Canard
6:40 Glue the Vertical stab
10:26 Glue the Nozzle
12:21 Screw the Wings
15:33 Covid breath lol
15:40 Glue Tank support
16:36 Instructions check
17:10 See you guys ! THANKS !!!
17:26 CNHL 4000mAh 70C fit test
17:47 BEAUTFUL AND SEXY !
18:00 OUTRO & THANKS !
18:24 Photos of that beauty…

☄️?? FlyFans Saab JAS-39 Gripen 70mm EDF JET PNP (Swedish Air Force)

Wingspan 765mm, length 1345mm, empty weight with full missiles and tank 1820gr, (with CNHL4000 70C 2510gr / HRB4000 2420gr).
– Motor : 3060-1900kv IR with FMS Pro 70mm 12 blades EDF
– ESC 80A Hobbywing
– 6 servos 9g
– 6 missiles, 1 tank (removable)

Book’s CG 90mm from the wing leading edge (where the fuselage meets the wing), it’s at the joint of the back of the battery cover.

-Book’s Rates :

Mode 1: Canard is only mixed with elevator control : elevator (elevon) 70%, canard 40%, aileron (elevon) 70%, rudder 65%.

Mode 2 (my flight mode): Canard and elevon mixed-control :
– High (book’s rates) : elevator 60% (18mm canard measured at trailing edge, 10mm elevon), ailerons 60% (10mm), rudder 100%
– Mid : elevator 45% (12mm canard measured at trailing edge, 7mm elevon), ailerons 45% (7mm), rudder 70%
– Low : elevator 30% (7mm canard measured at trailing edge, 3mm elevon), ailerons 30% (4mm), rudder 30%
_Neutral position : elevon 2mm down and canard flush!

Servos wires Labels :
Ch1 Aileron (the first elevon) / ch2 Elevator (the second elevon) / ch3 Throttle / ch4 Rudder and steering wheel / ch5 Gears / ch6 Canards

#gripen #jet #flyfans #rcplane #avgeek #fighter #freewing #70mm #highalpha #crash #turbine #unboxing #jas39 #assembly
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: FlyFans Saab JAS-39 Gripen 70mm EDF JET PNP | ASSEMBLY / BUILD | (English/Français) 4K
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] [Applause] hi guys so here so guys today uh we will do the the assembly the build of the fly fans grapen 70 millimeters from turbine rc.com you will find the link in the description to buy this jet and also to download the book the instructions so let’s get it started so i just before recording the the video i just had a look at the wires in order to uh to write you down all the the labels because it’s uh it’s written in china so now you get the the english translation controller so let’s get it started so first you have to unscrew uh four uh four screws here so i’ve already done that no big deal and then you have all the wires just uh down below so um [Music] first what do we have to do is to plug the plug the channel 5 the landing gear and open the landing gear so we will i will take my servo tester the channel 5 is right there up over here [Music] great nice cool cool all right then we will have to uh to uh to return to put the plane upside down to check the servos but i think it’s already connected we will check so the rudder is four we’ll have a look at that will put on neutral yes that’s good all right so that’s good nice [Music] don’t need to do that power the camera servo back to the neutral port and install the server holder with screws i think that it’s already done but we will check this is a six channel number six for the canard so uh if you want to use it you see this is a a y wire if you want to use it only for pitch so you can just plug your receiver here here but if you want some air runs mixing so you have to to take these two wires separately in your receiver comprehension receptors the two channels i will see so that’s a neutral and so yeah that’s that’s working yes that’s nicely done really cool so back to neutral all right cool to the compartment okay so nothing to do here so now let’s put together this canal all right with some screws this is two millimeters uh driver like that this is the next driver two millimeter screws so now i will try to yes will be easy just like that all right good so we’ll do the same for the the other side after pipe cotto so okay now that’s done now we will glue the vertical connect the servo with extension and pay attention to the recording positive and negative okay so the rather the rudder is right there okay so like that be careful not to cut the wire of course if i give the cable okay so good now we have to check the polarity always be careful with that black on black and white to yellow that’s good i will secure with a bit of a with a bit of tape very easy just some clear tape to to be sure it won’t go off i just need to draw and put we never know so good and now just have a look at the wiring how i will uh put that in not too much so i know it’s for me all right that’s a perfect fit really really nice so yeah my my decals my water d cars are not perfect because my plane has been built during winter and when it’s too cold in the factory and uh and with too too humidity the water decals are not perfect so it’s only mine the factory told me that the the next uh the next one will be uh will be perfect well then classic just confetti [Music] oh it’s already already tacky it’s a cold aqua i think it will be perfect yeah nice the nozzle i will do it right now as my my glue is a is open some scratches right there too on the nozzle all right a bit in this hole this part is under you see on the bottom and now we will we will take it great you have to pull it apart and then retack it you can do that many times that’s how it works and now that’s good perfect perfect perfect that’s nice all right so glue the vertical that’s done adjust the length of the push rods install the pull rod plug the cabin cabin rod the wings bar and connect the extension and fix the extra cable with tape or tie and plug it into the reserve all of the fuselage the wingspar to the marks perfect we’ll put a bit of tape once again um you can put the cable right in that hole on its wheels so great nice perfect fit i love that i really really love when it’s just perfect like that i will put the other one good nice perfect now now the screws i’ve got four left okay amazing it’s a perfect fit the screws are already nice all right so so that’s done glue the nose landing gear cover glue the jet nozzle that’s done glue the fuel tank rock the hole now that’s good perfect nice so that’s i think that’s pretty it so now we are done with the assembly [Music] the montage and this is it so what do we need to do now let’s have a look tidy all the wires plug the receiver in according to the console to the corresponding plug and put the receiver into the bottom of the present compartment instead of plywood okay so the next step will be the the receiver installation so see you on a on the next uh on the next video guys thanks a lot for watching this uh this assembly and uh as you have seen it’s uh it’s already here really simple quite nothing to uh quite nothing to do and you see this is a cnhl 4000 and it will go perfectly in there no problem but i’ve got all the wires this is a big mess i will do that later so yeah that’s it here you go the beautiful and sexy gripen 70 millimeters that’s nice really really cool bit so guys see you soon thanks again for watching don’t hesitate to put a thumbs up and to subscribe to subscribe to to support the channel and to follow me in my in my next adventures guys [Music] [Music] now [Music] you
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#FlyFans #Saab #JAS39 #Gripen #70mm #EDF #JET #PNP #ASSEMBLY #BUILD #EnglishFrançais
arthur rc, source