Descriptions:
FMS F/A-18F 70mm EDF v2 Jet PNP • UNBOXING / ASSEMBLY / SETTINGS (English/Français 4K 60fps)
Beschreibung zum Video:
⚓️ ? FMS F/A-18F V2 Jet 70mm EDF PNP
Buy yours here :
⚠️? With my code ArthurRC you can get 10% discount on your FMS order using my link
Or 15$ off (for order of 100$ minimum) with my code $15ArthurRC
?? ? Buy FMS planes (for Worldwide customers) ➡️
?? FMS European Dealers (Revendeurs FMS Europe) :
FR + BE + NL + LU ➡️
DE + CH + AT ➡️
You can buy my things here ⬇️
✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
?? Hi folks ???
Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???
If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link
Thank you very much in advance my friends ???
?? Salut les copains ???
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???
Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal
Merci beaucoup beaucoup d’avance les amis ???
? Follow me on Instagram :
⏰ TikTok :
You can buy my things here ⬇️
✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
? Buy your Universal Afterburner KM RC Model ➡️
❌ Buy your Planes Stands here ➡️
⚓️ ? FMS F/A-18F V2 Jet 70mm EDF PNP
Buy yours here :
Wingspan: 875mm
Length: 1186mm
Flying Weight (LiPo 6S at 585gr) full weapons + tank : 2222g (tank, under wing missiles : 57g)
Flying Weight (LiPo 6S at 585gr) only wingtip missiles : 2165g
Wing area : 19.3 dm/2
Wing load : 112.17 g/dm2
Motor : 3060-KV1900 Inner runner
EDF : 70mm 12 blades V2
ESC : 80A (5A BEC)
Servos : 9g x9
Rx : 7ch (throttle / ailerons / flaps / gears / rudder / elevator / nose wheel)
Battery : LiPo around 585g (HRB 6S 4000mah 60C or SMC LiHV 4400mah 75C)
❌ Book CG from wing root Leading edge : 70-80mm but maiden 85mm and TAIL HEAVY so second flight 80mm and easier…
? Triple Rates (my low / book’s low / book’s high) :
Ailerons : 10mm (40%) / 10mm (40%) / 14mm (50%)
Elevator : 16mm (60%) / 16mm (60%) / 18mm (70%)
Rudder : 10mm (35%) / 12mm (50%) / 16mm (60%)
Flaps : 25mm / 50mm with down 2mm (14%) elevator compensation
⏰ Flights with timers and voltage (checked few minutes after landing):
-1st beginning filmed Full ordonnance (SMC 6S LiHV 4400 75C) : CG85mm then 80mm : 6m47 flight (5m48 T) : 3.83v
-2nd Full ordonnance (HRB 6S 4000 60C) : CG80mm : 3m40 flight (3m03 T) : 3.88v
Key Features:• High quality 80A ESC, powerful KV1900 inner running motor with the latest 70mm 12-blade EDF V2• CNC-machined shock-absorbed landing gear sets• Screw-together construction• Button type canopy hatch• Pre-installed, newly designed ball link style control horns for more throw.• A set of 4 different decals so you can customize yourself.
0:00 Présentation ?? ??
1:30 UNBOXING
7:39 ASSEMBLY
18:11 SETTINGS
30:05 Please subscribe ???
30:28 Photos
#f18 #rcplane #aviation #fms #jet #jeti #opale #radiocontrol #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #rc #edf #unboxing #topgun #settings #assembly
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!
Vollständiger Text aus dem Video: FMS F/A-18F 70mm EDF v2 Jet PNP • UNBOXING / ASSEMBLY / SETTINGS (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!
hi folks so guys today we will do the unboxing assembly and settings of the FMS F18 F that’s a 70 mm zdf that’s the V2 and that’s beautiful licensed by Boeing that’s my very first F18 guys here is the specifications but I think on this version that’s uh a 1900 KV that’s uh what I uh what I read and also the CG I didn’t find the same things on the FMS website I think it’s written 70 to 80 so we will see right we will see the screws we take it first I need to get your push rods and the screws also I think that’s the nose cone that’s it with a hole of course I’m always unlucky with the brand new planes so flaps R tracks think that’s the horizontal stabilizers yeah that’s the horizontal elevator Prof G digital Metal Gear cool but no full flying stab as you can see here is the Rudders vertical stabilizers nice some missiles and another one right here the wings bar first Wing no decal so that’s uh very raw all the panel lines that’s good the foam finish is not bad at all the foam is pretty hard mm it’s not bad at all here is the fuse Lage not glued the canopy should be reglued pretty scale there’s a cheater hole tring link supension sup and the nose no gear quite cool that’s it folks you got some drop tanks right here to put in the middle of course like that and boom here is the last uh last missiles Hy and that’s it folks that’s it that’s it now we’ll have to to do all the water slide decals so now let’s do the assembly the first thing you want to do is to install the wings so you put the Wings part you will pick up the wires inside the wing a runs and flaps and then you just have to plug it the flaps check the polarity guys de and that’s it then you take your screws that’s the 16 mm so it’s not the longest that’s the small one 2 mm Al in key okay that’s good then we flip it over but we have to take wires A flaps wire now you feed the wires inside the [Music] hole C is stab just a dry fit to check how it goes yeah right okay you let the earing take a you let the air get inside the mixture and it will be good like that all right so this side is okay [Music] that for mm you will put the 26 mm screws longest and then we can put all the all the bombs and drop tanks you can see the shape of it up perfect that’s good and that’s all that’s good the right the right one is this one all right okay you have to install the push rod and do your rates you can see the flap settings on the last line 25 and 15 mm just to show you and to prove that the motor is a 3060 1900 KV [Music] this is a 0 m ESC so that’s a good thing so I’ve already uh plugged everything inside my receiver I’ve got a seven Channel assist from JY and so I just would like like to show you that I’ve put the nose wheel separated with the rudder like that I got [Music] seven all the servos are in the right way we’ll check the gear all right no big deal on that [Applause] [Music] thing so we got two longer four same size and two bit uh bit different a bit smaller so that’s Flash 25 I need a bit more so I will change my second Point yeah we go to 40 it will be good yeah yeah perfect p 25 per I will set a delay I’ve Got 5 Seconds to get down and going put 3 seconds to go up maybe yeah that’s it wow that’s hard yeah that’s flush good now we just check with full full flaps is the if the deflection is the same perfect that the same and when you look at that this way yeah that’s good perfect that’s done okay for the flaps then we will do this two this two I think is for the maybe it’s for the [Music] rders but maybe it’s the same length longit wait these six are the same length so we don’t really care we just have to screw a bit let’s do the arounds now we are here [Music] Coe left that’s good I we do the right right now so the rights um a R’s a On’s 10 low and 14 high and I will put 8 mm for my low [Music] so that’s a bit too much well it should be 35 per yes good 35% right here what’s what it called right okay car for okay 50% it look like this the high M and low yeah no big difference is we see in during the flight foreign good all right okay airs and flaps are good now we’ll do the what elevator elevator ele Ator what do we want we want [Music] 10 so let’s see the neutral position when it’s like that okay perfectly neutral bam great great great great okay so the low is 10 mm 10 mm for the low that’s not enough 35% 40 40% 4 12 say mm M mm 55% for 16 mm and then the rudder yes by 35 5% for 10 mm I’m sure it will be 40 and maybe 60 [Music] so 12 mm for the low from the book do m yes 50% for 12 mm and4 16 good that’s 60% all right so that’s good for that so that’s it folks now I will put all these water decals on my own because it’s very boring to do that with the phone on my head and yeah we will see how it goes see you soon folks thank you so much for watching as usual don’t forget the Thumbs Up And subscribe to the channel I won’t say it’s enough but don’t leave me alone stay with me and I see you very soon take care folks bye-bye [Music] [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#FMS #FA18F #70mm #EDF #Jet #PNP #UNBOXING #ASSEMBLY #SETTINGS #EnglishFrançais #60fps
arthur rc, source
