Descriptions:
Freewing Me-262 twin 70mm HP RC PLANE • ASSEMBLY • (English/Français 4K 60fps)
Beschreibung zum Video:
?? Hi folks ???
Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???
If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link
Thank you very much in advance my friends ???
?? Salut les copains ???
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???
Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal
Merci beaucoup beaucoup d’avance les amis ???
? Follow me on Instagram :
⏰ TikTok :
You can buy my things here ⬇️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
0:00 Presentation
0:27 ESC Wires sorting (secure connections)
7:44 Wings assembly
11:30 Nose Landing Gear connection
12:45 Landing Gear TEST
13:42 Elevator assembly (servo centered / pushrod)
16:46 Tail assembly
18:04 Rudder servo / pushrod
19:09 Book CG 100-110mm (too nose heavy)
20:00 Ask your questions
20:32 THANKS for SUBSCRIBING ???
21:04 Photos + LiPo placements
??? Freewing Messerschmitt Me-262 “7 Yellow” V2 Twin 70mm EDF Jet High Performance
Specifications :
Wingspan 1500mm, length 1280mm, weight without LiPo 2570gr!
⚖️ with HRB 4000 60C 3155gr / CNHL 4000 70C 3240g / with HRB 5000 50C 3315gr / with CNHL 5000 70C 3400g
2952-2100Kv brushless inrunner motors
EDF métal 12 blades with ESC 60A hobbyWing, Internal SBEC, EC5 connector
Speed : 165kmh
❌ Book’s CG 100-110mm but maiden at 113mm and it’s nose heavy but 118mm is way better (can’t put LiPo any further aft…)
CG 118mm :
CNHL 4000 70C (690gr) (all the way back)
HRB 5000 50C (745gr) (all the way back)
HRB 4000 60C (585gr) (see photo)
CG 113mm (nose heavy):
CNHL 5000 70C (830gr) (all the way back)
? My rates (high/mid/low) :
– Aileron 22/15/15mm
– Elevator 18/15/10mm
– Rudder 28/20/15mm
– Flaps (outer flap) 20/30mm with up 10% (1.5mm) elevator compensation
⏰ Flights with timers and voltage (checked few minutes after landing on cell meter):
-1st (filmed), CG113mm: CNHL 6S 5000 70C : 4m22 flight (3m26 motor) 3.87v
-2nd (filmed), CG118mm: CNHL 6S 4000 70C : 3m51 flight (2m53 motor) 3.83v
-3rd, CG118mm: HRB 6S 5000 50C : 3m42 flight (2m53 motor) 3.85v
#assembly #rcplane #freewing #jet #jeti #opale #radiocontrol #setup #modellbau #me262 #eflite #new #warbird #perfect #foam
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!
Vollständiger Text aus dem Video: Freewing Me-262 twin 70mm HP RC PLANE • ASSEMBLY • (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!
[Music] foreign so guys let’s start uh without further Ado the assembly of the Messerschmitt freewing 262 high performance twin 70 millimeters so first we have to remove the left and right plastic all right so um the controller we actually filled down all the wires are under this plastic green all right and then we will have to sort out all kinds okay so we’ll have to to sort the wires and I think there’s a lot OB wing 60 M’s esc’s all right so yeah we just just have to do that first all these wires foreign buff it maybe we can put that back on a tunnel the painting is a the paint is really a really thick so that’s a good thing just cut it off so I’m in I have pull on itself all right so it’s sort out and connect the white wire and just yeah ESC extend wire foreign foreign be careful of the polarity always well that’s very very very tough but I will secure it with some tape around just that it can save you foreign [Music] perfect okay now I can put the throttle the ESC and then we have the flaps foreign so this is what the flaps I’ll try that that the ailerons foreign and then the three the three uh three wire wire is for the landing gear and we will plug in the third plug I will put the nose gear and all of this this S3 will go to the sequence door so yeah landing gear and the other is right there all right so it looks good now carbon Rod connect the Left Right main wing okay we will have to put the wires on the top of the wing ham the smallest goes to the front of the wing and the longest at the back now the longest is this one and so it’s a like that you can’t do a mistake and this one is like that and that’s good insert the main Wing into the fuselage at the same time so that the connect wires fit the main gear by screws so I think and I’m sure it’s the four bigger screws and we see the country goes I have to be sure to uh to grab all the wires destroys all right I think it’s good yeah I’ve got everything we get what the hair runs blending gear flaps and throttle so that’s good so perfect now I will put the wing here you go this is it vomit sir oh that’s deep foreign next fix the main Wheel by screws connect the nose lending gear now come on another connected so that’s this wire n landing gear are there this is a triple wire and so it’s right there great connect the landing gear extend wire and the landing gear controller um foreign and that’s it just like that it does work perfect that’s perfect and you can see that the front wheel goes inside to the back so it means that the CG I think the CG is done with the gear in because there will be more weight to the back when the gear is in yeah but it doesn’t say anything about that but I will do like that so yeah it works that’s good function thank you foreign rod screw fixing the left right elevator okay well I found that portfolio this is a screw three by eight this are for the rudder and these two are for the elevator um first this one and you can see that there is only one one push Rider for both elevators okay now I see the holes figured right perfect okay all right screw fixing left right okay inside the bending wire into the rudder servo to go in this arm just like that and we will Center the center of the wire the servo the elevator servo take care neutral that the neutral position of the servo and so we will Center the elevator looks good like that okay so now we will have to assemble the tail remove the tape of the elevator wire okay so now we will put that in yeah good foreign enough all right nice perfect fit remove the fuse large it was in rudder so I will put it like that on the outer hole ah it’s a good idea now kid what’s up we will do the the center of the servo all right that the end guys uh foreign foreign here you go guys next I will do my radio uh Radio setup radio assembly no big deal for a plane like that so uh don’t hesitate to to ask me in the comments if you have some some question about the Radio setup or the assembly or I don’t know why don’t hesitate to tell me uh what do you think about this beautiful Beast foreign see you very soon guys thank you so much for watching for watching that hesitate to put a thumbs up as usual and consider to subscribe to the channel if you liked it and like that you won’t miss any next videos So yeah thank you so much guys once again and have a good one see you very soon folks bye [Music] [Music] foreign
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#Freewing #Me262 #twin #70mm #PLANE #ASSEMBLY #EnglishFrançais #60fps
arthur rc, source
