UNBOXING & ASSEMBLY • FMS Russian Su-27 Twin 70mm EDF Jet PNP RC PLANE • (English/Français 4K 60fps)

UNBOXING & ASSEMBLY • FMS Russian Su-27 Twin 70mm EDF Jet PNP RC PLANE • (English/Français 4K 60fps)

Beschreibung zum Video:
⚠️? With my code  ArthurRC  you can get 10% discount on your FMS order using my link

Or 15$ off (for order of 100$ minimum) with my code $15ArthurRC

?? ? Buy FMS planes (for Worldwide customers) ➡️

?? FMS European Dealers (Revendeurs FMS Europe) :
FR + BE + NL + LU ➡️
DE + CH + AT ➡️

You can buy my things here ⬇️

✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️

✈️ Jets and more ➡️

?? Hi folks ???

Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???

If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link

Thank you very much in advance my friends ???

?? Salut les copains ???

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???

Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal

Merci beaucoup beaucoup d’avance les amis ???

? Follow me on Instagram :
⏰ TikTok :

You can buy my things here ⬇️
✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
? Buy your Universal Afterburner KM RC Model ➡️
❌ Buy your Planes Stands here ➡️

?? FMS Twin 70mm EDF Su-27 Jet PNP (Gyro reflex)

Wingspan : 1110mm
Length : 1640mm
Empty weight (just without LiPo) : 3600g
Flying weight : CNHL 6S 4000mah 70C (690gr) + 104g lead in tail part + KM RC Model afterburners x2 : 4290g
Wingload : 132 g/dm2
Wing area : 32.5 dm2
Power : 2x 3060-KV1900 Brushless inrunner motor
ESC Predator 2x 80A with one UBEC 8A
12 blades EDF 70mm x2
13g metal digital Servos x4
9g metal digital Servos x8

LiPo 6S 4-5000mAh (depends on their weight)

Rx 6 channels minimum with Y wire for UBEC 8A (throttle, ailerons, elevator, rudder (mix with nose steering wheel), gear, airbrake)
EPO foam

❌ Book CG (gear down) : 140-150mm from wing root Leading edge but MAIDEN 180mm (Jon is at 200mm) with CNHL 6S 4000 70C (690g) all the way back with foam carved + 104g lead in glued tail part !

? Triple Rates (my low / book’s low / 100%) :
Ailerons : 10/15/23mm
Elevator (leading edge) : 20/35/55mm
Rudder : 10/20/25mm

⏰ Flights with timers and voltage (checked few minutes after landing):

0:00 Presentation
0:47 Specifications
1:32 Open ?
2:11 Screws / nose cone
2:40 Elevator
3:36 Missiles
4:13 Book
4:21 Wingspar
4:34 Rudders
5:39 Canopy
6:16 Inside cockpit wires
7:16 Tail part
7:43 Wings
9:05 CG 180mm measurement
10:54 Ventral fins
11:37 Fuselage
13:25 ASSEMBLY Rudders
14:45 Elevators
19:36 Wings
21:31 BAD WEATHER
22:10 Ventral fins
23:03 Nose cone
23:15 Gear down ?
24:42 CNHL 6S 4000 70C 690g
25:25 KM RC Model afterburners ?
26:52 Find the CG
27:28 Carve foam
28:25 Adding lead (104g)
29:33 That’s done ?
30:25 Thanks a lot ?? Please SUBSCRIBE ?
31:14 Detailed photos

#su27 #rcplane #fms #jet #jeti #opale #radiocontrol #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #rc #sukhoi #assembly #unboxing
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: UNBOXING & ASSEMBLY • FMS Russian Su-27 Twin 70mm EDF Jet PNP RC PLANE • (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] foreign folks it’s harder welcome to my channel twins guys today we will unbox the FMS suhoi 27 2017 millimeters coming directly from bees to B in Belgium the European dealer and boom here you go what a beaut e Exotica quick look on the specification the characteristic I’m sorry two brothers radio control foreign guys thanks to my good friend John from the YouTube channel two brothers radio control I will CG mine at 180 millimeters here you go here is the Beast wow a color is insane let’s unbox this big big baby let’s start with the screw bag here we go here is the screws the things to uh for the the horizontal the full flying step and the nose cone kundani the full flying steps there are some lid inside I can feel it you do plumbing uh all right very cool you can see some rivets foreign nice the other one is the same perfection yes pretty damn cool all right they are some missiles and I think that this time I won’t Maiden with the weapons some two other Army sides a book so that’s a huge Wings bar foreign stabilizers the Rudders so nice the decals are cool yeah great bowling digital Metal Gear it’s already attached to German tea with some scale panel lines very very beautiful nothing to say here you can see the connection very easy connectica very nice of course with a Truman panel yeah great bomb all the wires this is a xt90 it’s in 360 and get the gear let’s throw it all rudder I can have a separate no steering wheel you can see three three wires so that’s cool uh this is a landing gear channel of five ABC so Channel 5 are the gears you back eight amps now you break the return cool that the tail a tail part that you you have to glue but before gluing I will check the CG and see if I have to put some lid in the tail okay so the right wing and what magnificent ideas FMS are really really really really awesome very very nicely done that’s beautiful get there the LED right there and then let you see only one servo and so you only only have one plug that’s cool and the other wing just perfect okay everything is already attached so easy so easy no quick connections it was a CG from the wing Leading Edge I said 100 and 80. so it’s right there inclusive take five spot right here you see just in front of the on the plastic part yeah that’s eight millimeters behind the beginning all right I will do my mark on the other wing all right and here you see that’s that’s way in front of the wing it’s not too too apt at all you see right here there is plenty of room behind is the Beast the ventral fins it key community yeah great nothing special it’s plastic outside plastic and uh okay full of foam and Jet the edges are plastic and the bottom is plastic also that’s cool I’m quite some plastic and now the most beautiful the fuse what a beast all right that’s huge is some massage some others right here okay all right all right all right so now that’s empty not severed thank you there is the two yes seeds [Music] plastic doors foreign so first we will assemble the vertical I will need 16 millimeters screws four of them is two millimeters Allen key all right so of course the stickers outside very simple can be easier foreign [Music] okay the Rudders are done now we’ll have to to turn upside down and put the shaft and you will need 10 millimeters then you will need a black little screws so you insert first where there is a hole you see foreign screws all right nice and tight then you can insert the full flying steps of course we are upside down and then you can put this ring right here inside this hole you see we will insert that so let’s see this side you will see better so insert that shaft you put the ring with the hole facing upward upwards let it fall down then you take the little black screw foreign awesome that’s very very very scale very cool very very cool we will put the link cage on the last hole from from the server with a Servo tester elevator is here that’s neutral a neutral position of the servo yeah that’s perfect and so we will Center with these marks you see should be like that just like that yeah here um you adjust the length should be good hello take on it up let me see and we talk with it like on that get very good enough exactly the same length nice come here the wings so no wings bar Ah that’s cool you see there is already the the plug fixed in the fuse pretty nice so the black is here on that side all right and then you feed the wires and boom that’s it so that screw this first wing and that’s it the same on the other side so the minus is the black and the signal is a yellow from and boom there you go you see folks when I tell you that it’s raining every day and I can’t fly just to show you that I’m not lying look at that look at that awful weather uh it’s 3 P.M guys and it’s almost dark so then the ventral fins the ventral fins [Music] yeah the foam is inside and this is the biggest part like that is that way like that slide in oh yeah good all right that’s done no it’s cone it will go this way like that and that’s it and then I will do the CG with the gear with the gear down because there will be more weight backwards when the gear is down so I will try with this one cell lipo I will try to put the gear down positions in this one cell lipo that’s good beautiful so beautiful insane very cool so now we can flip it over magnific ENT grows better than me wow that’s so so cool very nice suspension pretty awesome heavy jet I will fly with my standing Trail 4000 with a weight of 690 grams and as everybody he says said I have to I will have to carve some foam right here because there is you have to be careful because there is the the nose wheel so we’ll just have a look quickly like that while the outbreak is here this is flap servo this is and of course I will put my afterburners from knrc model and that’s it will it will add 40 uh 40 grams in the in the back [Applause] so you see you get some zip tie and your units of course be careful to secure the wires like that it won’t be sucked by DDF isn’t it feel s in from we will simulate the weight just like that and you can see there is a lead in the back of the plane already this is stuck on so I will put it like that yes it will be around there anyways that uh that thing it will be glued and it cannot be on wow that’s a beast so so beautiful and so my CG is yeah right here Okay so bump way too nose heavy so first we will try to to carve a bit of foam and we will see boom [Laughter] here is the hole for your lipo to go through Give It Up I don’t think it will change anything but I will try okay it doesn’t change anything where I’m around 170 170 millimeters [Music] 20 29 29 grams it’s right that’s right it’s not enough it’s about to see I got this huge thing this is 75 grams let’s see it’s gone and it’s still not heavy one now we are good yeah 104 grams 104 grams of lead in the tail song [Music] I’ll try to put that inside so that’s done I succeed to put some some lid I’ve put a huge cylinder I’ve lived in the in the very in the very tale that’s 104 grams of leaders so let’s glue this and we will wrap this up so I will let it dry like that it’s glued and the plane is totally assembled now I will do my rights of course and it will be ready to fly so that’s it folks thanks again thank you so much for watching guys not hesitate to put the thumbs up as usual it’s very important for us on YouTube and subscribe to the channel of course don’t leave me alone and don’t leave the channel like that thank you so much folks see you very soon and take care bye-bye is [Music] bye [Music] [Music] thank you [Music] thank you [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#UNBOXING #ASSEMBLY #FMS #Russian #Su27 #Twin #70mm #EDF #Jet #PNP #PLANE #EnglishFrançais #60fps
arthur rc, source