Descriptions:
UNBOXING Super Cub • FMS PA-18 1300mm RC PLANE • (English/Français 4K 60fps)
Beschreibung zum Video:
⚠️? With my code ArthurRC you can get 10% discount on your FMS order using this link
Or 15$ off (for order of 100$ minimum) with my code $15ArthurRC
This FMS PA-18 is way more beautiful and scale in real life than on photos ?
?? ? Buy FMS planes (for Worldwide customers) ➡️
?? FMS European Dealers (Revendeurs FMS Europe) :
FR + BE + NL + LU ➡️
DE + CH + AT ➡️
?? Hi folks ???
Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???
If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link
Thank you very much in advance my friends ???
?? Salut les copains ???
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???
Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal
Merci beaucoup beaucoup d’avance les amis ???
? Follow me on Instagram :
⏰ TikTok :
You can buy my things here ⬇️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️
✈️ ?️ ? FMS 1300mm PA-18 Super Cub with Reflex V2 PNP
Wingspan: 1300mm (51.2in)
Overall Length: 986mm (38.8in)
Empty weight with Rx : 1293gr
Flying Weight CNHL 3S 2200 40C (207gr) : 1500g
Powerful 3536-850KV motor / 40A ESC Predator
Wing Load: 48g/dm² (0.096 oz/in²)
Wing Area: 30 dm² (464.7 sq/in²)
Servo: 9g digital x 6pcs
Prop : 11×7
Recommended Battery: 3S 11.1V 2200mAh 25C
Receiver : 7ch (if use gyro modes + motor reverse)
❌ Book CG : 60-70mm from wing root Leading edge but MAIDEN 80mm !
? Rates (my low / book’s low / book’s high) :
Ailerons : 10/12/16mm
Elevator : 12/14/18mm
Rudder : 12/14/18mm
Flaps : 30/80 degres with 2.5mm down elevator (12%)
⏰ Flights with timers and voltage (checked few minutes after landing):
The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players’ transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain. In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.
Features:
1. Powerful 3536-850KV motor with 40A ESC provides adequate thrust for any situation.2. CNC metal landing gear structure for less-than-perfect landings.3. Oversized pneumatic rubber tires for all-terrain operations.4. STOL capable (Takes off in less than 3m/10ft)5. Preinstalled navigation lights6. Two-section fuselage7. Two-piece wing and horizontal stabilizer for easy transportation8. High-strength carbon fiber wing spars9. Screw-together assembly10. Large battery bay11. Preinstalled ball-linked pushrods for increased precision12. Tough two-blade nylon propellers13. Functional flaps 14. Optional floats
0:00 Présentation française
0:15 English presentation
1:08 Specifications
2:30 OPEN
2:46 Book
3:10 Spinner
3:36 Wing spar
3:54 Wings (CG 80mm?)
6:09 Rear fuselage
7:11 Air pump
7:30 Horizontal stab
8:15 Wing struts
8:30 11×7 prop
8:45 Accessories
9:28 Front fuselage
10:01 Inside cockpit (reverse wire is the signal yellow one plug)
10:39 Landing Gear
11:14 That’s it…MERRY XMAS !
11:34 Please Subscribe ???
11:55 Photos
#pa18 #rcplane #fms #jet #jeti #opale #radiocontrol #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #rc #unboxing
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!
Vollständiger Text aus dem Video: UNBOXING Super Cub • FMS PA-18 1300mm RC PLANE • (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!
[Music] foreign [Applause] boxing of the FMS PA 18 Super Cub 1.3 meters thanks to a B2B as you can see here the FMS European dealer and go Mercia Beast to be FMS set to possibility reflex uh this is a PNP version with a The Reflex gyro if we could have a look at the spec quickly so you can tell 1.3 meters wingspan 0.9 long around 1.4 Kilograms the motor size the SC is the 40 amps six servos four and six Channel radio you will need a seven channels receiver if you want to add the gyro reflex and the reverse foreign between 60 and 70 millimeters from the lineage the blade is a 11×7 and this is a 3s 2200 lipo so this is a very small box because the fused out is in two parts um there are some LEDs so that’s pretty cool what a good smell y instruction manual of course with the reflex instructions in English View on animal in German and in French of course property inspired with a horizontal spar this is carbon fiber sound Calvin in Coney Island very good is the vortex generators one bright white LED and a red for the left wing you can see the air foil this is a very standard airfoil device flaps the LED and the air ones digital servos with ball links already attached sausage foreign 270 so 70 is right there whoa 70 yeah yeah it’s very very uh yeah we I think we can go easily without any any problem to 80 millimeters we will see that later [Music] notary surgery like so make sure exhale oh yeah foreign like so now pump s you know this is a the pump that you will have to buy at the sport the Sport Shop here is the horizontal stabilizer we will fold a bit the foam inches Excel don’t need the screws it will be just a yeah good the wing struts the old bone nice and easy the two blades prop Eleven by seven but I will I will balance really actually Kitty right two days Flex this is a reflex upgraded wire I will keep it right there and all the screws and the thing I will need and there is something you see to to inflate the tires nice plastic it’s plastic right there it’s full plastic so that’s nice pretty good very very nice xt60 and The Reflex with all the Salvo wires coming from it and there is a reverse I knew there is a reverse on the throttle and ending gear so cool that’s so satisfying okay there is a cover for the the valve but it looks good like that the pressure looks good maybe it’s a bit too much because it will it could bounce yeah we will see this is it guys so um I uh see you very soon for the uh the assembly uh assembly video have a good uh have a good Christmas time Merry Christmas to everybody and enjoy your your holidays and your family and and your friends see you very very soon guys don’t forget to put a thumbs up as usual thank you so much for that and don’t forget to subscribe yes bye bye foreign [Music] [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#UNBOXING #Super #Cub #FMS #PA18 #1300mm #PLANE #EnglishFrançais #60fps
arthur rc, source
