UNBOXING THE BEST GLIDER • Django Bubble Surfer RTF by SANSIBEAR ? • (English/Français 4K)

UNBOXING THE BEST GLIDER • Django Bubble Surfer RTF by SANSIBEAR ? • (English/Français 4K)

Beschreibung zum Video:
HONESTLY, THIS “DJANGO BS” IS THE BEST GLIDER I’VE EVER FLOWN AMONG ALL THE GLIDERS I’VE TESTED (F3J, F3K, F5J, F3B) ? #notsponsored
Get yours at

?? Hi folks ???

Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???

If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link

Thank you very much in advance my friends ???

?? Salut les copains ???

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???

Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal

Merci beaucoup beaucoup d’avance les amis ???

? Follow me on Instagram :
⏰ TikTok :

You can buy my things here ⬇️

? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️

?️ Bubble Surfer [Django BS] by SANSIBEAR ?

➡️

Tail servos : 2 x KST X08
Wing servos : 4 x KST X06H
Fuselage : Cockpit and tail CFK (carbon)
Wings : Sandwich Carbon XPS (foam)

Wingspan (envergure) : 2540 même
Length (longueur) : 1375 même
Weight PNP (without Rx, LiPo) : 477gr
Weight RTF CG80mm with 2S 2000mAh (114gr) : 610gr

⚖️ Parts :
Wingspar + elevator screws : 9gr
Right wing (with 2 KST X06H) : 147gr
Left wing (with 2 KST X06H) : 143gr
Horizontal stab : 16gr
Fuselage (without Rx) : 162gr

Surface : 46,9 dm²
Wing load (Charge alaire) : 13 g/dm2 (CG 80mm 610gr)

? Settings (réglages, merci @pierremeunier ?) :

Ailerons : 20mm down / 14mm up
Flaps (mix ailerons to flaps) : 10mm down / max flap can go up
Elevator : 7mm / 12mm
Rudder : 17mm

– Flaps offset : Speed 2mm up / normal 0 / thermal 0,5mm down
– Ailerons offset : Speed 2mm up / normal 0 / thermal 0
– Elevator offset : Speed 1mm down / normal 0 / thermal 0

Snap flaps : 2mm down flaps only
Thermal Flaps camber : 2mm/4mm max

– Brakes (Freins) : Flaps 90° / elevator compensation 7mm down
– Launch in speed mode with a Preset (like in F3K) : 1mm down elevator (on a momentary switch)

❌ Book CG : 80mm (LiPo 2S 2000mAh 114gr all the way forward) but CG 84mm glider 602gr without lead on LiPo !!!

Max limit average wind 12 km/h (7.5 mph), I won’t fly with more wind ?

Flights :
– Maiden (filmed) : 10min flight : 8.10v left (for a 8.20v, 2S 2000mAh LiPo) ??

0:00 Presentation
0:41 OPENING
0:52 Wings covers
1:30 Left wing
5:09 Left Wing weights 143gr
5:45 Horizontal stab
6:45 Stab weights 16gr
7:28 Fuselage
8:41 Pegs to throw it !
9:15 Nose / Cockpit LiPo
11:40 Rudder
12:47 Fuselage weights 162gr
13:19 @pierremeunier callouts
14:30 Right wing
15:50 Wingspar, stab screws weight 9gr
18:07 @OpaleParamodels callouts
18:28 Please Subscribe ???
19:53 Photos

#glider #rcplane #django #sansibear #hlg #f3k #f3j #jeti #radiocontrol #setup #modellbau #bubblesurfer #new #perfect #unboxing #assembly
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: UNBOXING THE BEST GLIDER • Django Bubble Surfer RTF by SANSIBEAR ? • (English/Français 4K)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] foreign [Applause] today we will unbox together the glider from sunsi bear this is the Jungle Bubble Surfer 2.5 meters for 600 grams without any engine foreign glider for sure wow the covers the wing covers that’s so cool foreign so I bought the ready to fly version it means that the kst servos are already mounted I’m crazy is wow foreign guys the wingspara imprisonment you can see the huge flaps and the other one pretty pretty nice the bubble Surfer so this is a sandwich with a with foam and carbon layer this is a razor blade ready that’s very very beautiful Servo covers go out on this elbow very very nicely done is [Music] United as you have a maybe uh tell guys I’m really bad at modeling and at doing stuff with my hands I’m I’m better at piloting than buildings on a some stuff so yeah I prefer letting that to a to people who know that knows that way better than me we will try to to see the weight of the wing of one half wing 143 grams foreign [Laughter] that’s just insane really really insane so so cool I will put that here carefully very carefully and you can see some covers for the horizontal State stabilizer foreign [Music] really really cool very very nice foreign you can see the the layer the carbon layer is very very thin you can see the foam through the the carbon fibers that’s insane and it waits 15 grams 16 grams for the original for the horizontal silver foreign very nice job guys I hope that the top of the rudder isn’t damaged because it’s folded I already hope not oh that’s cool there is a anti-slider sandpaper to fix this tab the horizontal very very cool foreign carbon tube for the fuselage Multiplex plug like a socks that’s nice I will keep it should we get this very very nice and you can see the two pegs like that you can throw it with your two fingers you can grab it like that you can see you can grab it like that and you throw it Javelin lounge or lost himself with Tony duala so so nice exhale foreign I will have to make some holes for the antennas because it’s full carbon very cool everything is well uh well thought Twitter so you can see the the kst for the rudder and elevator x08 Edge all your your wires and I will see how how to put the Lipo in that maybe stuck with some foam pieces or I don’t know maybe uh build a plywood platform s foreign that’s a real piece of heart guys that’s very impressive very nice super nice you can see I’m I’m shaking I can’t see but yeah you can see my hand foreign that’s a perfect fit let’s have a look at the rudder perfect it’s not faulted nice very very nice you can see the foam on pavada construction XPS the razor blade very sharp so cool and I don’t know if I can maybe I will I can wait yes I can so the fuselage with the rudder 162 grams foreign expertise regular Junior okay YouTube so yeah guys uh you can check the channel of Pierre Money because he’s a team pilot for uh for San siber and you’re already already had flown this uh this jungle this Jungle Bubble suffer and so he will uh it will give me uh some advice and and the throws and the CG and everything uh I need to know because he’s a very very good pilot so you can trust him without any problem and I didn’t see the screws for the elevator here is the other wing it’s also perfect very cool very very nice razor blade jungle BS bubble Surfer awesome foreign of course the wings bar a lot of bubble paper for a bubble software [Music] foreign [Music] so those some washer off of the horizontal the screws yeah that’s for the kst so yeah you have get the wings bar full carbon and the Phillips screws for the elevator these two washers are for the elevator response see perfect all right it’s a smell too small foreign I think it goes like this so I will put the the link to this uh to this glider in the description guys and as usual I will put also my link to a opal para models this is a jetty France where you can find all the good all the good Jetty stuff and uh and many other things so check this out in the description guys so that’s it for this beautiful unboxing thank you so much guys for watching as usual I I won’t thank you enough for all you are doing for me and uh thank you yeah thank you for watching thanks a lot for subscribing also and don’t hesitate to comment and uh and tell me what do you think about this uh jungle bubble Surfer foreign foreign foreign thank you so much guys have a good one bye [Music] [Music] foreign [Music] [Music] foreign [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#UNBOXING #GLIDER #Django #Bubble #Surfer #RTF #SANSIBEAR #EnglishFrançais
arthur rc, source