Descriptions:

UNBOXING & ASSEMBLY • FMS Bae Hawk 80mm EDF Jet PNP RC PLANE • (English/Français 4K 60fps)

Beschreibung zum Video:
⚠️? With my code  ArthurRC  you can get 10% discount on your FMS order using my link

Or 15$ off (for order of 100$ minimum) with my code $15ArthurRC

?? ? Buy FMS planes (for Worldwide customers) ➡️

?? FMS European Dealers (Revendeurs FMS Europe) :
FR + BE + NL + LU ➡️
DE + CH + AT ➡️

You can buy my things here ⬇️
✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️

✈️ Jets and more ➡️

?? Hi folks ???

Thank you for watching this video and don’t forget to subscribe so you don’t miss anything (it’s free but it helps content creators a lot) ???

If you want to help me to expand my squadron ? or buy a specific plane to review, you can help me by making a small donation via my PayPal link

Thank you very much in advance my friends ???

?? Salut les copains ???

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) ???

Si vous voulez m’aider à agrandir mon escadron ? ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal

Merci beaucoup beaucoup d’avance les amis ???

? Follow me on Instagram :
⏰ TikTok :

You can buy my things here ⬇️
✈️ FMS planes ➡️
? Jeti Rx and DS16 ➡️ @OpaleParamodels
?CNHL LiPo ➡️
✈️ Jets and more ➡️

?? FMS BAe Hawk 80mm EDF Jet PNP (Gyro reflex)

BUY YOURS :

Wingspan : 1042mm /41.0 in
Length : 1226mm / 48.3 in
Empty weight : 1890g
Flying weight : CNHL 6S 4000mah 70C (690gr) : 2580g
Wingload : 125.48 g/dm2
Wing area : 20,56 dm2 (318.68 sq.in)
Power : 3270-KV1930 Brushless inrunner motor
ESC Predator 100A with 8A BEC
12 blades EDF 80mm
13g metal analog Servo x8
LiPo 6S 3-4000mAh (depends on their weight)
Rx 7 channels (gyro modes, throttle, ailerons, elevator, rudder (mix with nose steering wheel), gear, flaps)
EPO foam

❌ Book CG (gear down, upside down) : 85-95mm from wing root Leading edge but MAIDEN 105mm with CNHL 6S 4000 70C (690g) all the way back with foam carved until flat platform !

? Triple Rates (my low / book’s low / 100%) :
Ailerons : 8/10/10mm
Elevator : 8/12/18mm
Rudder : 10/12/25mm
Flaps : 15/35mm with 3mm down elevator

⏰ Flights with timers and voltage (checked few minutes after landing):

0:00 Présentation
0:55 OPEN
1:28 Specifications
2:35 Bag
3:00 Smoke pod
3:18 Wing
4:30 Book CG 85-95mm but MAIDEN 105mm !
5:46 Instructions manual
7:03 Horizontal stab
7:42 Fuselage
10:17 www.4model.eu
10:48 Battery bay
13:11 Assemble Horizontal
14:46 Wing
15:55 Smoke pod
16:05 Ventral fin
16:30 Glue antennas
17:27 Check CG
19:50 Thanks for watching ?? Please SUBSCRIBE
20:26 Photo

#hawk #rcplane #fms #jet #jeti #opale #radiocontrol #modellbau #eflite #new #hsdjets #perfect #foam #crash #freewing #rc #bae #assembly #unboxing
Subscribe on Youtube: Arthur RC, click here
Freitag – Newsletter zu allen aktuellen Videos der Woche aus 17 Channels, jetzt anmelden!

Vollständiger Text aus dem Video: UNBOXING & ASSEMBLY • FMS Bae Hawk 80mm EDF Jet PNP RC PLANE • (English/Français 4K 60fps)
Hinweis: Text aus der automatischen Spracherkennung aus dem Video ist allgemein bekannt ungenau!

[Music] foreign so guys today we will unbox the FMS b-a-e Oak 80 millimeters this is the red arrow the scheme and a big thanks to my friend at Beast to be in Belgium awesome dealer this is a European dealer I hope there won’t be any damage beautiful little beast let’s open it up I really hope there won’t be any damage right there finger crossed oh it’s on the wing so there is a reflex V2 inside a quick check on the spec uh the characteristic language foreign I will tell you where will be mine vdf of course is 80 with 12 blades and this is for 6s 4000. well viewed some LED lights as you can see here and here on the nose so so cool treading link suspension foreign nuts any damage that’s a cool news this is the cable to uh update The Reflex Society facility so I think this is a smoke bud I think difference all right nice let’s see the wing salsa very very smart the linkage are already applied I think the flaps are foam hinges but the irons it’s nylon Edition this is all your wires all right nicely done but that’s a very small jet so you can let the wing mounted every time so yeah that’s good pretty good and so the CG uh just hit Jesus said they said what he said 85 to 95 from Leading Edge but leaning Edge is right there this is this part yes it’s right here from there is a Silla attack foreign it’s right here around there hello brother radio control [Music] I think I will start 20 millimeters behind the book to get the an icg so yeah right there around here I will put my CG for the maiden I remember yeah right here we will see that [Applause] is a gyro instructions English German Francaise and Chinese is some problems so let’s continue very nicely packaged very very nice well done FMS well done the horizontal stabilizer with elevators with nylon inches foreign nothing is damaged or I don’t know what that’s pretty awesome pretty pretty cool of course I won’t put any uh After Burner in that jet because a Hulk it’s like an alpha jet and there aren’t any any afterburner so let’s see the fuse a lot of questions you know One LED right there and titled I’m pilot a countable noise and a nose light with a pita tube so cool you will have to glue one antenna right here I think in the ventral fins here and another lead LED light and alcohol and Legacy so now you can see the the EDF plug some rivets and panel lines that’s very very scale very beautiful for a 90 millimeters that’s pretty awesome the rudder is very nice Royal Air Force foreign this is a predator 100 amps ESC pretty cool it will be a powerful system as usual with FMS all right sorry foreign model that EU there is the inside you’ll get an ec5 connector and The Reflex The Reflex gyro is right here so you have all your wires coming out even the throttle are inside the gyro mainly gases we have some Led accessibility right so silly LED the rudder Rudder I think this is for the the nose this is a nose gear the no steering wheel so yeah this is a Rudder coming out from the from The Reflex then you have the the different mode for the gyro um elevator errones and throttle good very good and so as I said the rudder this cable right here comes from a no steering wheel so I will unplug it and I will put it on a separate channel on my receiver like that I I can trim my nose steering wheel easily all right River a is I think we can carve this this part a foam to put the light power as far back as possible we will see that yep so that’s it folks that’s it so next step is assembly [Applause] the first thing you want to install this is the horizontal stabilizer foreign so you remove the tape and then you plug the servos don’t really care about which plug on which servo also for the kids songs then we will try to fit these wires inside the hole I accidentally fill it though then you take two screws all the screws are the same come there before that’s perfect and boom and so you have one you have one screws pair oh nice foreign perfect then we can put this thing a smoke this way leaky um toward the nose and that’s it now we are here we will glue the the antennas and this is the end folks foreign so you see that this one with the the round shape is going under the fuselage I will just put a just a bit of a foam tag this way boom and then we will glue the top antenna all that Curry and Tinder and this is it folks this is it this is pretty it yeah so for the CG this is between uh a tier 85 to 95 millimeters so we will go 95 all right so it’s right there but my friend my friend John told me to go just a bit a hair in front of the nose up in front of the main the main landing gear so the main landing gear is right here and so we will go to uh yeah nine two five don’t get to my accounts so I can see that okay so this is we will start at uh 110 millimeters 110 so it will be a right there along the fuselage 110 it will be there just a little Mark right here [Music] foreign guys I will uh I will put all the all the electronics and uh on my receiver and all the stuff and then I will set my rates and we will see you for the maiden flight foreign thank you so much guys for watching um if you if you want to subscribe feel free to do it it’s free and it will help me a lot like that you can watch all my uh new videos without missing anything and uh take care and see you very soon for the maiden flights [Applause] foreign [Music]
Für den Inhalt des Videos ist der VideoCreator: Arthur RC verantwortlich.
#UNBOXING #ASSEMBLY #FMS #Bae #Hawk #80mm #EDF #Jet #PNP #PLANE #EnglishFrançais #60fps
arthur rc, source

6 Comments

  1. Can I put “Fms Reflex v2” on a homemade plane? Example: will it be a problem if we adjust the reflex v2 according to the “SUPER EZ” plane and attach it to a similar plane?

  2. It would be nice if they came out with one of the long nose versions. I just like the looks of them better. Also black would be nice too.

Comments are closed.